Read the passage below carefully, and then choose the best answer:
Inside a 4D Film
A lot of people think that 3D films are pretty cool. When you watch a 3D film, it sometimes feels like you can reach out and touch the things that you see. In the future, however, 3D might be replaced by something even more advanced: 4D. What you see in a 4D film is the same as what you see in a 3D film. The screen is the same, and the glasses are the same. 4D films are different because they don’t use 3D technology. People in the audience also feel physical things during the films. Let’s look at a few examples. Let’s say that you are watching a film about earthquakes. If you are watching a 4D film, maybe your seat will suddenly start to shake. It will feel like you are in the middle of an earthquake, but you are not. The 4D effects make your seat shake. Or perhaps during the film, one of the characters gives flowers to another character. The people in the cinema might suddenly smell flowers. The point of 4D films is to make people feel like they are in the film. When we watch films these days, we only use two senses: our sense of sight and our sense of hearing. If we use our other senses, the film might feel more real to us. 4D films already exist. The film Avatar was released everywhere in 3D, but in Korea and Hong Kong, it was also released in 4D. People who watched Avatar in 4D feel wind and rain. They also smelled smoke from the weapons in the film, and sometimes their seats moved. Will 4D replace 3D films? It is possible, but we can’t be sure yet. One problem with 4D films is that it is very expensive to show them in theaters. Before a theater shows a 4D film, it has to buy a lot of special equipment. However, 4 films are catching on. Other films shown in 4D include Shrek 4-D, and Iron Man 3.
7. What can be inferred from the passage?

Read the following passage and choose the best answer (A, B, C, D):
The ubiquitous bar code, developed more than twenty years ago, is not a stagnant product. On the contrary, the technology has been improved so that it can be used more efficiently. Much less expensive than a computer chip, the bar code can hold more information than it had in the past by adding a second dimension to the structure. The bar code consists of a series of parallel vertical bars or lines of two different widths, although sometimes four widths are used, printed in black on a white background. Barcodes are used for entering data into a computer system. The bars represent the binary digits 0 and 1, just like basic computer language, and sequences of these digits can indicate the numbers from 0 to 9, which can then be read by an optical laser scanner and processed by a digital computer. Arabic numbers appear below the code. The traditional bar code has been used to monitor skiers at ski lifts and to determine price and perform inventory control on groceries, drugs, medical supplies, manufactured parts, and library books to name a few. The bar code used on grocery products, introduced in the 1970s, is called a universal product code (or UPC) and assigns each type of food or grocery product a unique code. The five digits on the left are assigned to a particular manufacturer or maker and the five digits on the right are used by that manufacturer to identify a specific type or mark of product. Traditional single dimension bar codes are not readily customizable because there is little extra space. The two-dimensional bar code, with an information density of 1,100 bytes, allows a considerably greater amount of information to be coded than does the traditional bar code, including customized information. [A] It also has built-in redundancy, meaning that the identical information is duplicated on the same code. [B] Therefore, if the code is damaged, it can still be read. [C] The technology even allows pictures or texts to be contained within the code, as well as bar code encryption. [D] The new technology dramatically reduces the errors of the single dimensional bar code and reduces the enormous costs that some companies have reported in the past. 
5. Where in the final paragraph ([A], [B], [C], or [D]) could the following sentence be logically placed? Thus, the manufacturer is able to add additional information on the bar code that it finds useful for its own tracking purposes

 Despite _____ , we arrived on time.

(304)______

Choose the best answer:
The director _______ for the meeting by the time I got to his office.

Those letters _____ now. You can do the typing later.

(393)______

Choose the best answer:
He/ usually/ go/ herd/ buffaloes/ other boys/ village.

Read the following passage and choose the best answer (A, B, C, D):
Cities develop as a result of functions that they can perform. Some functions result directly from the a great city regardless of the disadvantageous ingenuity of the citizenry, but most functions activity. result from the needs of the local area and of the surrounding hinterland (the region that supplies goods to the city and to which the city furnishes services and other goods). Geographers often make a distinction between the situation and the site of a city. Situation refers to the general position in relation to the surrounding region, whereas site involves in physical characteristics of the specific location. Situation is normally much more important to the continuing prosperity of a city. If a city is well situated in regard to its hinterland, its development is much more likely to continue. Chicago, for example, possesses an almost unparalleled situation: it is located at the southern end of a huge lake that forces East-West transportation lines to be compressed into its vicinity, and at a meeting of significant land and water transport routes. It also overlooks what is one of the world's fiest large farming regions. These factors ensured that Chicago would become characteristics of the available site, such as being prone to floding during thunderstorm Similarly, it can be argued that much of New York City's importance stems from its early and continuing advantage of situation. Philadelphia and Boston both originated at about the same time as New York and shared New York's location at the Western end of one of the world's most important oceanic trade routes, but only New York possesses an easy-access functional connection (the Hudson-Mohawk lowland) to the vast Midwestern hinterland. This account does not alone explain New York's primacy, but it does include several important factors. Among the many aspects of situation that help to explain why some cities grow and others do not, original location on a navigable waterway seems particularly applicable. Of course, such characteristics as slope, drainage, power resources, river crossings, coastal shapes, and other physical characteristics help to determine city location, but such factors are normally more signifiant in early stages of city development than later.
3. The passage suggests that a geographer would consider a city's soil type part of its: 

Read the passage below carefully, and then choose the best answer:
The Power of Crowdsourcing
There is a famous old saying that when trying to solve a problem “two heads are better than one”. Yet until recently, businesses would often rely on one key person to get important tasks done. But thanks to a phenomenon called crowdsourcing, more and more companies are allowing their consumers to have their say when designing new products. The term “crowdsourcing” refers to the process of outsourcing jobs which were once done by a single person to a large group (or a crowd) of people. In the past, crowdsourcing wasn’t practical, as it was impossible to gather thousands of like-minded people together to share opinions. Now, thanks to the Internet, online forums, and social media, this isn’t a difficult task at all. There are many important applications for crowdsourcing in business. For example, if a small business was looking to develop a business logo, it might employ a single designer and hope for the best. However, with crowdsourcing, companies can specify some guidelines about their project, set a budget, and start a design contest online. Within hours, it will likely receive hundreds of designers sending them logos. In the end, they can choose the design they like best and the winner will get compensated. Crowdsourcing has other applications as well. A website called Duolingo is using crowdsourcing to translate documents into different languages. It offers free lessons to language learners. As part of their tests, users translate lines to test their knowledge. Then, a computer programme will analyze thousands of test results for consistency and arrange an accurate translation. Not everyone is sold on crowdsourcing, though. In many cases, it may be better to rely on the opinion of a few specialized professionals than information from a crowd. For instance, it makes more sense to trust the opinion of one top doctor than to take the advice of 1,000 random people regarding a health issue. Another criticism is the low wage that crowdworkers usually receive. Since crowdworkers are freelancers and not employees, they can be paid less than minimum wage. Whether you love or hate crowdsourcing, it appears to be here to stay. So before you make any financial judgements, consider following the crowd and give crowdsourcing a try.
8. Which of the following sentences is true?

Laos and Myanmar were admitted _____ ASEAN in 1997.

(499)_________

The teacher told Joe _____

(223)_____

Choose the word or phrase among A, B, C or D that best fits the blank space in the following passage.

The Emergence of Megacities

The urban shift over time has led to the emergence of the megacity – a city with a population of 10 million or more. New York City and Tokyo were the first (21)______megacities, both (22)________an urban population of over 10 million by the 1950s. But today they are (23)_________alone in their size. In 2014, there were 28 megacties across the planet – from Sao Paulo, Brazil to Lagos, Nigeria and London, England to Shanghai, China – and all major global regions except Oceania are (24)_______with megacities.

Most of the megacities in recent years are located in Asia and Africa. In fact, it is where seven of wight newest megacities can be found and where 10 of the 12 (25)_________megacities in 2030 will be located. From 2010 to 2015, Kinshasa’s population grew (26)________   over 23 percent, and today over half of 11.6 million residents are under 22 years old. A (27)________of factors has led to this growth including migration from rural areas, high fertility rates, and widening of the city’s boundaries. The population is (28)________almost all support structure in the city (29)_______the threat of food shortages, traffic (30)__________, and insufficient education facilities have become an obvious reality.

Question 24:................

Choose the best answer:
My sister’s hobby is ________ outdoor activities.

Choose the best answer:
He passed the exam because he’s intelligent.

Fill in each numbered blank with one suitable word or phrase.

The Early Life of Bill Gates

While Bill Gates had to work (1)………..to become what he is today, his story isn’t exactly a rags-to-riches one as he was born into a fairly wealthy family. His father was a successful attorney while his mother was a school teacher who went onto a member of the Board of Directors of the First Interstate Bank. Gates was a bright student and (2) ……….well academically, especially in mathematics. And, this was exemplified by the 800 points that young Bill Gates scored in the mathematics part of an intelligence test.

Bill Gates developed a (3) ………..for computers and programming as early as 13. At the same age, Gates enrolled in the Lakeside School, a private preparatory school. While Gates was still at the school, the school administration decided to buy a computer from the General Electric Company. (4) ………his flare in programming, the school administration excused Gates from classes to allow him to (5) ………….his interest. On the GEC machine, Bill Gates built his first ever computer program.

At the school, Gates met Paul Allen and they worked (6)………..to find bugs in a system belonging to Computer Center Corporation. In exchange for computer time and royalties, Gates and Allen along with two other students wrote a payroll program for Information Sciences. This led to Gates’ school becoming fully aware (7)………..his talent and they had him build a program (8)………..scheduled students in classes.

Gates and Allen continue to build software and at just the age of 15, Bill Gates sold a software to optimize traffic for $$ 20,000. A few years later, he developed another software and earned $$ 30,000 from (9)...... And, this was the start of Bill Gates’ journey to a billion-dollar (10)…………..

(8)……….

Choose the best answer:
Friendship is a two-sided ________, it lives by give-and-take.

Read the following passage and choose the best answer (A, B, C, D):
Prehistoric mammoths have been preserved in the famous tar pits of Rancho La Brea (Brea is the Spanish word for tar) in what is now the heart of Los Angeles, California. These tar pits have been known for centuries and were formerly mine for their natural asphalt, a black or brown petroleum-like substance. Thousands of tons were extracted before 1875, when it was first noticed that the tar contained fossil remains. Major excavations were undertaken that established the significance of this remarkable site. The tar pits were found to contain the remains of scores of species of animals from the last 30,000 years of the Ice Age. Since then, over 100 tons of fossils, 1.5 million from vertebrates, 2.5 million from invertebrates, have been recovered, often in densely concentrated tangled masses. The creatures found range from insects and birds to giant ground sloths, but a total of 17 proboscideans (animals with a proboscis or long nose) - including mastodons and Columbian mammoths - have been recovered, most of them from Pit 9, the deepest bone-bearing deposit, which was excavated in 1914. Most of the fossils date to between 40,000 and 10,000 years ago. The asphalt at La Brea seeps to the surface, especially in the summer, and forms shallow puddles that would often have been concealed by leaves and dust. Unwary animals would become trapped on these thin sheets of liquid asphalt, which are extremely sticky in warm weather. Stuck, the unfortunate beasts would die of exhaustion and hunger or fall prey to predators that often also became stuck. As the animals decayed, more scavengers would be attracted and caught in their turn. Carnivores greatly outnumber herbivores in the collection: for every large herbivore, there is one saber-tooth cat, a coyote, and four wolves. The fact that some bones are heavily weathered shows that some bodies remained above the surface for weeks or months. Bacteria in the asphalt itself would have consumed some of the tissues of other than bones, and the asphalt itself would dissolve what was left, at the same time impregnating and beautifully preserving the saturated bones, rendering them dark brown and shiny.
5. The word "them" in paragraph 2 refers to: 

 Choose the word or phrase among A, B, C or D that best fits the blank space in the following passage:

"Men are lazy in the home, according to an official survey (1)……… today. They have about six hours a week more free time than wives, but play very little(2)…… in cooking, cleaning, washing, and ironing, according to the Social Trends Survey by the Central (3)…… Office.
 Nearly three quarters of married women (4)…… to do all or most of the housework, and among married men the proportion who admitted that their wives did all or most of the housework was only slightly lower.
 The survey (5)…… that washing and ironing was the least popular task among men, with only one percent (6)…… this duty, compared with 89 percent of women, and 10 percent sharing equally.
 Only 5 percent of men (7)….. the evening meal, 3 percent carry out household cleaning duties, 5 percent household shopping, and 17 percent wash the evening dishes. But when household gadgets break down, (8)……  are carried out by 82 percent of husbands.
 The survey says that, despite our economic problems, the majority of Britons are substantially better (9)….. than a decade ago. We’re healthier, too - eating healthier foods and smoking less.
 The (10)…..  Briton, not surprisingly, is more widely travelled than a decade ago. More people are going abroad for holidays, with Spain the favorite destination."

1. Men are lazy in the home, according to an official survey (1)……… today. 

Chọn câu đồng nghĩa với câu trên :
He is very intelligent. He can solve all the problems in no time.

Read the passage below carefully, and then choose the best answer:
Have you ever noticed that our machines are getting smaller? Cell phones, cameras, computers and everything else look smaller every year. One kind of new science involves machines that are smaller than we can imagine. The name of this science is nanotechnology. Nanotechnology means doing science, engineering, and technology at a very very small level. In other words, nanotechnology is the science of tiny things. But how tiny is the science of nanotechnology? In nanotechnology, scientists work with things that are the size of a nanometer. One meter has one billion nanometers. Here is another way to describe nanotechnology: it is the science of observing and controlling individual atoms and molecules. Nanotechnology is a new word, but the idea of studying atoms and molecules has existed for a long time. In 1959, an American scientist Richard Phillips Feynman gave a speech in which he claimed that we can see and control molecules and atoms. About ten years later, a Japanese professor came up with the term “nanotechnology”. Because nanotechnology is so new, we are only starting to understand how we can use it. Nanotechnology could be very useful in medicine. In the future, doctors may use nanotechnology to help with organ transplants. An organ transplant is the act of putting an organ into another person’s body. Scientists think that with nanotechnology, they might be able to make a person’s body accept a foreign organ. Nanotechnology might also help doctors fight infections, find diseases in patients, and deliver medicine to the right spot in patients’ bodies. Nanotechnology might also be useful in protecting the environment. It might be able to help us save energy, reduce waste, and keep water clean. For example, nanotechnology might be able to make some materials such as steel stronger. If we have stronger steel, we will be able to use it longer. That way, we can produce less steel and save our resources. Nanotechnology might be useful in so many ways. This science of studying tiny things could change the world.
1. Around what year did people start using the word “nanotechnology”?

Choose the word or phrase among A, B, C or D that best fits the blank space in the following passage:

"In the home a dad is very important. He is the (1)……who provides us with money to feed and (2)….. ourselves. He can decorate your bedroom, mend your radio, make (3)….. for your pets, repair a puncture your bicycle tyre and help you with maths homework. A dad can be very useful for (4)…. you in the car to and from parties, music and dancing lessons.
 A dad is the person whom you ask for (5)…. money. He is the one who (6)…. about the time you spend talking on the phone, as he has to pay for the bills. Dad is someone who will support you in an (7)…. , if he believes you to be right. He is someone who reads your school (8) …. And treats if it is good. A dad likes to come into a nice happy home evening, and settle (9)…. in his chair with a newspaper. He likes to (10) ….  his National Service days."

9. A dad likes to come into a nice happy home evening, and settle (9)…. in his chair with a newspaper.

Read the passage below carefully, and then choose the best answer:
Hunting Down the Truth about Killer Whales
Hearing that killer whales are in the area is sure to strike fear in the heart of anyone at sea. The thought of coming across a creature with a menacing name like that is a surefire sign you are on a path to destruction. As it turns out, killer whales, orcas, are actually highly sophisticated creatures that are usually harmless to humans. The title “killer whale” may actually be a mistranslation of the Spanish term “ballena asesina”, which means assassin whale. Orcas were nicknamed this due to their well-coordinated attacks on marine life, not for the danger they pose to humans. At nearly five to seven metres in length and a weight of over six tons, orcas are one of the largest creatures on the Earth. There are about 50,000 orcas worldwide that are spread out in several oceans. Orcas are classified as an Apex predator, which means no other creature hunt them for food. Scientists believe that there are between three to five different types of orca and they are all quite distinctive. The most frequently seen of these are Residents. They live in close-knit family units called pods, which can contain over 50 members, and their diet consists mainly of fish. Transient whales, however, prefer to travel in smaller groups of two to six whales. Meanwhile, Offshore whales were only recently discovered in 1988. They prefer to swim farther away from land than the others and several pods may come together to form groups as large as 200 whales. Although these orca groups may seem similar to the naked eye, they are extremely different in many ways, and scientists believe they haven’t interbred in thousands of years. Researchers also acknowledge that their knowledge of orcas is limited, and even more groups may exist. Male orcas have an average lifespan of about 30 years, while the average age for females is 50. However, there have been cases of females living up to 90 years. Yet when kept in captivity at marine entertainment parks, their life expectancies drop dramatically. In fact, it seems that the biggest threat to orcas these days is humans. Between the practices of hunting orcas, polluting their environments, and capturing them for entertainment purposes, we are making it very difficult for them to survive. Perhaps the killer whales aren’t the real killer after all.
2. What can be said about the different types of killer whales?