ADMICRO

Iron production was revolutionized in the early eighteenth century when coke was first used instead of charcoal for refining iron ore. Previously the poor quality of the iron had restricted its use in architecture to items such as chains and tie bars for supporting arches, vaults, and walls. With the improvement in refining ore, it was now possible  to  make  cast-iron beams, columns, and girders. During the nineteenth century further advances were made, notably Bessemer’s process for converting iron into steel, which made the material more commercially viable.
Iron was rapidly adopted for the  construction  of  bridges,  because  its  strength was far greater  than that of stone or timber, but its use in the architecture of buildings developed more slowly. By 1800 a complete internal iron skeleton for buildings had been developed in industrial architecture replacing traditional timber beams, but it generally remained concealed. Apart from its low cost, the appeal of iron as a building material lay in its strength, its resistance to fire, and its potential to span vast areas. As a result, iron became increasingly popular as a structural material for more traditional styles of architecture during the nineteenth century, but it was invariably concealed.
Significantly, the use  of  exposed  iron  occurred  mainly  in  the  new  building types spawned by the Industrial Revolution: in factories, warehouses, commercial offices, exhibition hall, and railroad stations, where its  practical  advantages  far  outweighed  its  lack of status. Designers of the railroad stations of the new age explored the potential of iron, covering huge areas with spans that surpassed the great vaults of medieval churches and cathedrals. Paxton’s Crystal Palace, designed to house the Great Exhibition of 1851, covered an area of 1.848 feet by 408 feet in prefabricated units of glass set in iron frames. The Paris Exhibition of 1889 included both the widest span and the  greatest height achieved so far with the Halle Des Machines, spanning 362 feet, and the Eiffel Tower 1,000 feet high. However, these achievements were mocked by the artistic elite of Paris as expensive and ugly follies. Iron, despite its structural advantages, had little aesthetic status. The use of an exposed iron structure in the more traditional styles of architecture was slower to develop.

The word “it” in paragraph 2 refers to ..........

Hãy suy nghĩ và trả lời câu hỏi trước khi xem đáp án

ZUNIA12
ZUNIA9
AANETWORK